Modeling the dynamics of tamponade multicomponent gases during retina reattachment surgery

Vitrectomy and pneumatic retinopexy are common surgical procedures used to treat retinal detachment. To reattach the retina, gases are used to inflate the vitreous space allowing the retina to attach by surface tension and buoyancy forces that are superior to the location of the bubble. These procedures require the injection of either a pure tamponade gas, such as C₃F₈ or SF₆, or mixtures of these gases with air. The location of the retinal detachment, the anatomical spread of the retinal defect, and the length of time the defect has persisted, will determine the suggested volume and duration of the gas bubble to allow reattachment. After inflation, the gases are slowly absorbed by the blood allowing the vitreous to be refilled by aqueous. We have developed a model of the mass transfer dynamics of tamponade gases during pneumatic retinopexy or pars plana vitrectomy procedures. The model predicts the expansion and persistence of intraocular gases (C₃F₈, SF₆), oxygen, nitrogen, and carbon dioxide, as well as the intraocular pressure. The model was validated using published literature in rabbits and humans. In addition to correlating the mass transfer dynamics by surface area, permeability, and partial pressure driving forces, the mass transfer dynamics are affected by the percentage of the tamponade gases. Rates were also correlated with the physical properties of the tamponade and blood gases. The model gave accurate predictions in humans. © 2017 American Institute of Chemical Engineers AIChE J, 63: 3651–3662, 2017     

Influence of Microstructure and Surface Activation of Dual‐Phase Membrane Ce0.8Gd0.2O2−δ–FeCo2O4 on Oxygen Permeation

Dual‐phase oxygen transport membranes are fast‐growing research interest for application in oxyfuel combustion process. One such potential candidate is CGO‐FCO (60 wt% Ce_0.8Gd_0.2O_2?δ–40 wt% FeCo₂O₄) identified to provide good oxygen permeation flux with substantial stability in harsh atmosphere. Dense CGO‐FCO membranes of 1 mm thickness were fabricated by sintering dry pellets pressed from powders synthesized by one‐pot method (modified Pechini process) at 1200°C for 10 h. Microstructure analysis indicates presence of a third orthorhombic perovskite phase in the sintered composite. It was also identified that the spinel phase tends to form an oxygen deficient phase at the grain boundary of spinel and CGO phases. Surface exchange limitation of the membranes was overcome by La_0.6Sr_0.4Co_0.2Fe_0.8O_3?δ (LSCF) porous layer coating over the composite. The oxygen permeation flux of the CGO‐FCO screen printed with a porous layer of 10 μm thick LSCF is 0.11 mL/cm² per minute at 850°C with argon as sweep and air as feed gas at the rates of 50 and 250 mL/min.     

First steps in developing a multimetric macroinvertebrate index for the Ohio River

The causes of degradation of aquatic systems are often complex and stem from a variety of human influences. Comprehensive, multimetric biological indices have been developed to quantify this degradation and its effect on aquatic communities, and measure subsequent recovery from anthropogenic stressors. Traditionally, such indices have concentrated on small‐to medium‐sized streams. Recently, however, the Ohio River Fish Index (ORFIn) was created to assess biotic integrity in the Ohio River. The goal of the present project was to begin developing a companion Ohio River multimetric index using benthic macroinvertebrates. Hester–Dendy multiplate samplers were used to evaluate benthic macroinvertebrate assemblages in relation to a gradient of water quality disturbance, represented by varying distances downstream of industrial and municipal wastewater outfalls in the Ohio River. In August 1999 and 2000, samplers were set every 100 m downstream of outfalls (12 outfalls in 1999, 22 in 2000) for 300–1000 m, as well as at upstream reference sites. Candidate metrics (n = 55) were examined to determine which have potential to detect changes in water quality downstream of outfalls. These individual measures of community structure were plotted against distance downstream of each outfall to determine their response to water quality disturbance. Values at reference and outfall sites were also compared. Metrics that are ecologically relevant and showed a response to outfall disturbance were identified as potentially valuable in a multimetric index. Multiple box plots of index scores indicated greater response to outfall disturbance during periods of low‐flow, and longitudinal river‐wide trends. Evaluation of other types of anthropogenic disturbance, as well as continued analysis of the effects of chemical water quality on macroinvertebrate communities in future years will facilitate further development of a multimetric benthic macroinvertebrate index to evaluate biotic integrity in the Ohio River. Copyright © 2007 John Wiley & Sons, Ltd.     

Comprehensive Design of a Three-Phase Three-Switch Buck-Type PWM Rectifier

A three-phase three-switch buck-type pulsewidth modulation rectifier is designed for telecom applications in this paper. The rectifier features a constant 400-V output voltage and 5-kW output power at the three-phase 400-V mains. The principle of operation and the calculation of the relative on-times of the power transistors are described. Based on analytical relationships the stresses of the active and passive components are determined and the accuracy of the given calculations is verified by digital simulations. Exemplarily, a 5-kW power converter is then designed based on the analytical expressions and on switching loss measurements from a hardware prototype constructed with insulated gate bipolar transistor/diode power modules. The loss distribution of the components, the total efficiency, and the junction temperatures of the semiconductors are then evaluated in dependency on the operating point. Finally, the trade-off between the selected switching frequency and the admissible power range for the realized design is shown and a total efficiency of 95.0% is measured on the hardware prototype, where an excellent agreement with the theoretically evaluated efficiency is shown     

Analysis of the Survivability of GaN Low-Noise Amplifiers

This paper presents a detailed analysis of the stressing mechanisms for highly rugged low-noise GaN monolithic-microwave integrated-circuit amplifiers operated at extremely high input powers. As an example, a low-noise amplifier (LNA) operating in the 3-7-GHz frequency band is used. A noise figure (NF) below 2.3 dB is measured from 3.5 to 7 GHz with NF<1.8 dB between 5-7 GHz. This device survived 33 dBm of available RF input power for 16 h without any change in low-noise performance. The stress mechanisms at high input powers are identified by systematic measurements of an LNA and a single high electron-mobility transistor in the frequency and time domains. It is shown that the gate dc current, which occurs due to self-biasing, is the most critical factor regarding survivability. A series resistance in the gate dc feed can reduce this gate current by feedback, and may be used to improve LNA ruggedness     

Feasibility Study of Batteryless Temperature Transponders Using Miniature Microwave Cavity Resonators

Batteryless temperature transponders have been constructed and tested. The design employs a sensing element consisting of a miniature cavity resonator loaded with a ceramic material of high dielectric constant and large temperature coefficient of resonant frequency. This is connected by thin coaxial cable to a small dipole or sector antenna. Prototypes with sensors 3 mm in diameter have been fabricated and can resolve temperature differences of 0.1°C in air. Signals have been obtained from transponders implanted in anesthetized rats, but antenna orientation is a critical and limiting factor that will require further efforts before a system is capable of operating in freely roaming animals.     

Maternal depression and early positive parenting predict future conduct problems in young children with attention-deficit/hyperactivity disorder.

Children with attention-deficit/hyperactivity disorder (ADHD) are at risk for adverse outcomes such as substance abuse and criminality, particularly if they develop conduct problems. Little is known about early predictors of the developmental course of conduct problems among children with ADHD, however. Parental psychopathology and parenting were assessed in 108 children who first met Diagnostic and Statistical Manual of Mental Disorders (4th ed.) criteria for ADHD at 4-7 years old. When demographic variables and baseline ADHD and conduct problems were controlled, maternal depression predicted conduct problems 2-8 years following the initial assessment, whereas positive parenting during the structured parent- child interaction task predicted fewer future conduct problems. These findings suggest that maternal depression is a risk factor, whereas early positive parenting is a protective factor, for the developmental course of conduct problems among children with ADHD. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Consistent modeling of capacitances and transit times of GaAs-based HBTs

This paper investigates how time delays and capacitances observed under small-signal conditions can be consistently accounted for in heterojunction bipolar transistor (HBT) large-signal models. The approach starts at the circuit level by mapping the large-signal equivalent circuit (which consists of charge and current sources) to the well-known small-signal circuit (which consists of capacitances, transit-time, and resistances). It is shown that and how bias dependent charge sources at either pn-junction impact transit-time, base-collector capacitance, and their mutual dependence. It is demonstrated for the example of a GaAs-based HBT that the interrelation of the elements is observed in measurements as predicted. The results of the investigation enhance understanding of HBT model characteristics and provide a criterion to check model consistency.